Bolid S2000-2 Manuel d'instructions

1 ORION ISS EXECUTIVE RELAY MODULE S2000-SP1 (ver. 1.56) INSTRUCTION MANUAL 1 GENERAL TECHNICAL DATA 1.1 General 1.1.1 The S2000-SP1 Executive R

10 BOLID ONE YEAR LIMITED WARRANTY Bolid Company and its divisions and subsidiaries («Seller»), 4 Pionerskaya Str., Korolev 141070, Moscow Region, Ru

2 1.2.3 The current consumed by the module (without regard to connected executive devices): – 140 mA max at 12 V (all relays are switched on); – 2

3 the module receives a command “Switch On for a Time”, the relevant relay switches on, while on elapsing the activation time the relay is switche

4 module itself (input number = 0). READY indicator shall flash with low duty cycle ratio. The module will return to the quiescent mode when the powe

5 network controller for the relay. The values 9 (Lamp) and 10 (Alarm Output) of this parameter are special ones. If Initial Condition is equal

6 2.2.3 Mount the module on the wall or within a cabinet in accordance with its Installation Manual (the module is to be mount closely to executive

7 To activate the self-diagnostic mode, open the module top cover and press the tamper switch on the PCB in SSSL pattern, where “S” (“short”) stands

8 ANNEX A S2000-SP1 Overall and Mounting Dimensions

9 ANNEX B S2000-SP1 Connection Diagram Main Power Supply+12V (+24V)0VRIP-12 (RIP-24)Backup Power Supply (optional)+12V (+24V)0VRIP-12 (RIP-24)NC17COM